publisherLiben
time2016/05/23
If you have the purchase plan for indoor playground, you'd better equipment yourself with some basic safety standard to help you avoid unprofessional manufacturer or sellers. The below are some basics for your quick understand, and hope they'd be a great help for you.
Fig.1 Indoor Playground of ASTM Standard-1
Fig 2. Indoor Playground of ASTM Standard-2
Fig 3. Indoor Playground of ASTM Standard-3
Chute Exit Region
All slides should have an exit region to help children maintain their balance and facilitate a smooth transition from sitting to standing when exiting. The chute exit region should:
· Be between 0 and -4°as measured from a plane parallel to the ground.
· Have edges that are rounded or curved to prevent lacerations or other injuries
that could result from impact with a sharp or straight edge.
· For toddlers the chute exit region should:
- Be between 7 and 10 inches long if any portion of the chute exceeds a 24°
Slope.
- Be no more than 6 inches above the protective surfacing.
- Have a transition from the sliding portion to the exit region with a radius of
curvature of at least 18 inches.
· For preschool and school-age the chute exit region should:
- Be at least 11 inches long.
- Be no more than 11 inches above the protective surfacing if the slide is no
greater than 4 feet high.
- Be at least 7 inches but no more than 15 inches above the protective surfacing if the slide is 4 feet high.
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.